Tritech SeaKing Скачать руководство пользователя страница 49

Страница: 49 / 54

SeaKing & SeaPrince Imaging Sonars

0374-SOM-00001, Issue: 08

© Tritech International Ltd.

Appendix F. Super SeaPrince External Reset

In the event of losing communications with the Super SeaPrince and being unable to re-

establish them it is possible to reset the unit to a preset standard.

Item changed

Default value

Item changed

Default value

Main Port Comms

RS232

Aux Port Comms

RS232

Main Port Baud (Hi/Lo) 115200 / 9600

Aux Port Baud (Hi/Lo)

9600 / 9600

Main Port Parity (Hi/Lo) None

Aux Port Parity (Hi/Lo) None

Main Port Data-bits (Hi/

Lo)

Aux Port Data-bits (Hi/

Lo)

ARCNET Baud (Hi/Lo) 156 / 78

Half-Duplex

False

ARCNET Sens (Hi/Lo) Neutral

Aux. Comms rate

1000ms

ARCNET Timeout

11 [Normal] (ET3)

Disable AutoComms

True

COMV6 Fitted

True

Note

In the event of other items, such as the operating frequencies, being changed

contact

Tritech International Ltd

for further advice and instruction.

In order to complete the reset process, the following steps will apply:

1. Ensure an RS232 COM Port is available, has been enabled within Seanet Pro and is set

for 115200 Baud.

2. Using an appropriate test cable, connect the Sonar to a suitable power supply and topside

control unit but do not apply power yet.

3. Locate the reset point on the body of the Super SeaPrince.

4. Place a magnet onto the reset point and apply power to the unit. Do not remove the magnet

until the unit has fully powered up for 5 seconds.

Содержание SeaKing























































Результаты поиска

Содержание SeaKing

Отзывы:

Похожие инструкции для SeaKing

Бренды по названию

Популярные бренды

Tritech SeaKing, Руководство по эксплуатации продукта

Результаты поиска

Содержание SeaKing

Отзывы:

Похожие инструкции для SeaKing

Бренды по названию

Популярные бренды