27
7.1.2 Local Console OSD F3 Settings (SET) Page
(continued)
7. Administration
(continued)
The settings in the
F3 SET
page are explained in the following table:
Setting
Description
OSD HOTKEY
Select the hotkey sequence that invokes the OSD (both
Local Console OSD
and
Remote OSD)
; [
Scroll Lock,
Scroll Lock
] or
[Ctrl, Ctrl
]. This is set to
[Scroll Lock, Scroll Lock
] by default.
PORT ID DISPLAY POSITION
This setting allows you to position the
Port ID
anywhere on the screen. The default is the upper left corner. When
selected, the screen switches to the last selected port, and displays its
Port ID
. To position the
Port ID
, use the
touchpad or the keyboard arrow keys, as well as the [
Pg Up
], [
Pg Dn
], [
Home
], [
End
], and [
5
] keys (on the numeric
keypad with [
Num Lock
] off). When the
Port ID
is in the desired location, double-click or press the [
Enter
] key to
lock it in position and return to the OSD.
Note: The Port ID is set independently for each port on the installation. The position specified here only applies to
the port that is currently active.
PORT ID DISPLAY DURATION
This selection gives you the option of displaying the
Port ID
for 3 seconds, or having the
Port ID
always off. The
default is to display for 3 seconds.
PORT ID DISPLAY MODE
Select how the
Port ID
is displayed:
Port Number
only,
Port Name
only or both
Port Number
and
Port Name
. The
default is to display both
Port Number
and
Port Name
.
SCAN DURATION
This setting determines the amount of time spent on each port when in
Auto Scan Mode
. Key in a value from 1 -
255 seconds, and then press the [
Enter
] key. The default is 5 seconds; a setting of 0 (zero) disables the
Auto Scan
function altogether.
SCAN/SKIP MODE
Select which ports will be accessed during
Auto Scan Mode
and
Skip Mode
.
•
ALL :
All ports that are accessible to the currently logged-on user
•
POWERED ON:
All ports that are both accessible to the currently logged in user and powered-on
•
QUICK VIEW:
Ports that are set as
Quick View
ports by an administrator
•
QUICK VIEW + POWERED ON:
Ports that are both set as
Quick View
ports by an administrator and are powered
on The default setting is ALL.
SCREEN BLANKER
If the console is left idle for the amount of time set with this function, the screen is blanked. Key in a value from 1 -
30 minutes, and then press the [
Enter
] key. A setting of 0 disables this function. The default is 0 (disabled).
HOTKEY COMMAND MODE
Enables / Disables the hotkey command function.
Hotkey Command Mode
is enabled by default.
HOTKEY
Toggle between the two
Hotkey Mode
invocation sequences. Options are
[Num Lock, Minus
] and [
Ctrl, F12]
.
OSD LANGUAGE
Determines which language the OSD menus are displayed in. Choices are English, Spanish, French, German and
Japanese.
