Trinity MPS 350, Инструкция по эксплуатации и сборке товара

Страница: 28 / 62

www.highwayguardrail.com
Revised: April 18, 2008 27
3 While pressing Down on the Latch Bar Handle, operate the Winch by pressing the Controller
Switch's DOWN button. Once the Frame Assembly has started going Down and has cleared the
Latch Bar Arms, you can release the Latch Bar Handle. Continue pressing the Controller
Switch's DOWN button until the Frame Assembly’s weight rest on the Support Chains. Allow the
Winch to run to provide slack in the Winch Strap. (See Figure 24.0 Below)
Figure 24.0 MPS 350 Controller Switch
Figure 24.1 MPS 350 in Down (Operating) Position with Weight of Frame Assembly on Chains
Figure 24.2 MPS 350 in INCORRECT Position with Weight of Frame Assembly on Strap
CORRECT
Down (Operating)
Position
INCORRECT
Position
MPS 350 Safety, Installation, Operation and Maintenance Manual