Trinity MPS 350, Инструкция по эксплуатации и сборке товара

Страница: 30 / 62

www.highwayguardrail.com
Revised: April 18, 2008 29
RAISING THE MPS 350:
The MPS 350 must be raised to an Up (Traveling) Position using the Winch.
!
DANGER:
Do not operate the MPS 350 near overhead power lines. If the MPS 350 comes
into contact or close proximity with a power line or there is arcing, STAY in the truck cab. Keep
away from any metal parts on the MPS 350. Do not let anyone get close to the truck. Do not
attempt to jump from the truck. The Power Company must disconnect the power before you
can leave the cab.
Know the overhead clearance of overhead obstructions. Never drive the MPS 350 under any
overhead obstruction without knowing the clearance height. Failure to follow this warning
could cause damage to the MPS 350 and may result in serious personal injury or death.
!
WARNING:
Ensure that no one is near, under or behind the MPS 350 when in operation.
Failure to follow this warning could result in serious injury or death to the operator and/or
bystanders.
!
WARNING:
Failure to ensure proper function of the Limit Switch may result in failure of the
Winch.
Step Actions
1 Push and hold the Controller Switch's UP button until the Latch Bar Arms drop into place. (See
Figure 26.0 Below) As the Frame Assembly approaches the Up (Traveling) Position, a pair of
Coil Springs located on the Bracket Assembly will contact a Frame Crossmember on the Frame
Assembly. The Frame Assembly will compress the Springs until the Latch Bar Arms drop into
place. The Limit Switch should stop the upward motion of the Frame Assembly prior to the
Frame Assembly bottoming out against the tubes that contain the Springs.
Figure 26.0 MPS 350 Latch Bar Arms in Locked Position
Note: If the Limit Switch fails to contact the Frame Crossmember on the frame in a way
that activates the switch, it may be necessary to add a piece of thin shim material to
the side of the Frame Crossmember to fill the resulting gap.
Figure 26.1 Shim Under Limit Switch to Ensure Proper Contact with Frame Crossmember
MPS 350 Frame
Assembly in Up
(Traveling) Position with
Latch Bar Arm Locked in
Place
Frame
Crossmember of
the MPS Frame
Assembly
MPS 350 Safety, Installation, Operation and Maintenance Manual