Trinity MPS 350, Инструкция по эксплуатации и сборке товара

Страница: 24 / 62

www.highwayguardrail.com
Revised: April 18, 2008 23
WINCH SYSTEM OPERATION
The MPS 350 must be raised and lowered using the Winch.
!
DANGER:
Do not operate the MPS 350 near overhead power lines. If the MPS 350 comes
into contact or close proximity with a power line or there is arcing, STAY in the truck cab.
Keep away from any metal parts on the MPS 350. Do not let anyone get close to the truck.
Do not attempt to jump from the truck. The Power Company must disconnect the power
before you can leave the cab.
Know the overhead clearance of overhead obstructions. NEVER drive the MPS 350 under
any overhead obstruction without knowing the clearance height. Failure to follow this warning
could cause damage to the MPS 350 and may result in serious personal injury or death.
!
WARNING: NEVER
ATTEMPT TO MANUALLY RAISE THE FRAME ASSEMBLY OF THE
MPS 350. Failure to follow this warning could result in serious injury or death to the operator
and/or bystanders.
A Control Box is located near the front of the MPS 350. The Control Box provides a Power Cut-off Switch,
a toggle switch for UP and DOWN operation, and a receptacle for attaching an UP and DOWN Control
Pendant. (See Figure 19.0 Below.)
Figure 19.0 MPS 350 Electrical Control Box and Power Shutoff Switch (Item 13 of Appendix Drawing 959/SS-298)
MPS 350 Safety, Installation, Operation and Maintenance Manual