Trinity Highway REACT 350 II, Руководство по сборке изделия

Страница: 12 / 68

TrinityHighway.com 11 Revision E November 2020
Screwdrivers

Screw gun or standard drill with adapter chuck for small screws/bolts

Flathead Screwdriver

Phillips Screwdriver
Miscellaneous

Traffic control equipment

Lifting and moving equipment (A lifting device is preferred although a forklift can be
used.) Minimum 2722 kg [6,000 lb.] capacity required. Do not lift overhead.

Compressor (100 psi) and Generator (5 KW)

Long pry bar

Drift pin

Tape measure 7.5 m (25’)

Chalk line

Rags, water, and solvent for touch-up
Important:
The above list of tools is a general recommendation and should
not be considered an extensive list. Depending on specific site conditions
and the complexity of the assembly specified by the appropriate highway
authority, the required tools may vary. Decisions as to what tools are needed
to perform the job are entirely within the discretion of the specifying highway
authority and the authority’s selected contractor performing the assembly of
the system at the authority’s specified assembly site.