Trinity Highway REACT 350 II, Руководство по сборке изделия

Страница: 28 / 68

TrinityHighway.com 27 Revision E November 2020
4) Attach Restraining Cables
Warning:
Four (4) Restraining Cables must be attached; two (2) on each side of
the Concrete Backup.
A.
Slide the threaded end of a Restraining Cable through the third guide down and attach
flat washer and nut as shown in Figure 21. Tighten the nut so it is flush with the end
of the threaded end of cable.
Figure 21 - Routing First Cable
B.
Route the Restraining Cable through the Cable Guides on the sides of the Cylinders,
around the Restraining Cable Pin as shown in Figure 22, back through the Top Cable
Guides on the Cylinders and through the Top Cable Guide of the Side Plate
(Figure 23).
Figure 22 - Front of System Cable Attachment (Concrete Backup)
7/8" Flat Washer
PN 118028
Side Cable
Anchor Plate
PN 614195
Threaded End
of Cable
Nut & Flat Washer
PN 115917 & 118001
Ferrule
PN 004003
Wedge
PN 004004
Restraining
Cable Pin
PN 612040
Restraining Cables
1/4" Nut & Lock Washer
PN 115946 & 118085
1
/4" Bolt
PN 113512