Trinity Highway REACT 350 II, Руководство по сборке изделия

Страница: 17 / 68

TrinityHighway.com 16 Revision E November 2020
Guardrail Attachment
Hardware is available to mount W-beam guardrail or a safety shaped barrier to the Self-Contained
Backup of the REACT 350
® II system. A folded Transition Plate and W-beam connector can mount
to either or both sides of the backup assembly (Figure 7). If bidirectional traffic is present, special
post spacing, rail, and rub-rail will be required for the guardrail. Thrie Beam guardrail adapters
are also available. Contact Trinity Highway for assistance (p. 3).
Figure 7
Guardrail Attachment Hardware
Bidirectional Traffic
If bidirectional traffic (vehicles traveling opposite directions on either side of the system) is
present, special consideration needs to be taken when placing the system. It is important that the
Self-Contained Backup does not become a roadside obstacle to the reverse direction traffic. If a
system is placed in a location where traffic will be approaching from the rear of the system,
transition hardware may be required.
Optionally, if space permits, the REACT 350 ® II may be offset so that the backup structure is
shielded by the roadside feature (p. 17). Guardrail transition hardware may also be used.
Figure 8
Bidirectional Traffic
Transition Plate
PN 616148
W-Beam End Shoe
PN 000926
3/4" Hex Nut
PN 115953
3/4" Bolt
PN 113548