Trinity Highway REACT 350 II, Руководство по сборке изделия

Страница: 34 / 68

TrinityHighway.com 33 Revision E November 2020
Recycling Information
When parts need to be replaced, it is recommended that the old parts be recycled as follows:
Steel should be sold as scrap to a local metal recycler.
HDPE plastic cylinders should be sold to a plastic recycler if possible. If a recycler is unavailable,
dispose of the material as plastic refuse.
Parts Ordering Procedure
1. Locate the Product Decal attached to the inside of the Rear Cylinder. Copy the sales order
information from the decal.
2. Make a list of any damaged parts, using part numbers and descriptions found on the
reference drawings included with the REACT 350 ® II system.
3. Only parts specified to be used in this system may be used during repair. The use of a
part not specified in this system design renders this system as one that HAS NOT BEEN
accepted by FHWA for use on the NHS and all observed crash testing to determine system
performance is negated. The use of a part not contained herein during the repair renders
the systems as something other than that which was tested.
Inspections
Inspections by the appropriate highway authority are recommended as determined by that
authority based upon volume of traffic and impact history. Visual drive-by inspections are
recommended at least once every three months. Walk-up inspections are recommended at least
twice a year.