Trinity Highway MATT, Инструкция по сборке

Страница: 23 / 44

TrinityHighway.com
February 2022
STEP 4
MATT™ CR Post 1 Top Assembly
PARTS INSTRUCTIONS
K 628285A 1 EA
Reference: SS-6288
1. Assemble the MATT™ CR Post 1 Top (Part K) to the MATT™ CR Post 1
Bottom as shown in the “MATT™ CR POST 1 TOP ORIENTATION
DETAIL” using specified hardware (Parts S, JJ, Y).
2. Tighten all threaded hardware to a snug position with a minimum of two (2)
bolt threads protruding beyond the nut.
S 4211G 2 EA
Y 3245G 2 EA
JJ 3240G 2 EA
Use only Trinity Highway parts that
are specified herein for the MATT™
for assembling, maintaining, or
repairing the MATT™. Do not
utilize or otherwise commingle
parts from other systems even if
those systems are Trinity Highway
systems.
WARNINGS
Ensure the MATT™ CR Post 1 Top is oriented according to the
detail above.
Ensure the Strut Hole in the MATT™ CR Post 1 Bottom was
installed
upstream. See Step 2A
Ensure threaded hardware is tightened to a snug position with a
minimum of two (2) bolt threads protruding beyond the nut.
Failure to follow this warning could result in serious injury or death
in the event of a vehicle impact with the system.
POST 1
Strut Hole