Trinity Highway MATT, Инструкция по сборке

Страница: 31 / 44

TrinityHighway.com
February 2022
STEP 11
MATT™ Cable Assembly
PARTS INSTRUCTIONS
P 3012G 1 EA
Reference: SS-6288
1. Assemble the MATT™ Cable Assembly [Part P] as shown above using
specified hardware (Parts Q, CC, DD), remove excess slack from the
cable.
2. Ensure that the bent portion of the Cable Anchor Bracket Angle [Part Q] at
CR Post 1 is up and hooked over the MATT™ CR Post 1 Top.
Q 33909G 1 EA
CC 4902G 2 EA
DD 3910G 2 EA
Use only Trinity Highway parts that
are specified herein for the MATT™
for assembling, maintaining, or
repairing the MATT™. Do not
utilize or otherwise commingle
parts from other systems even if
those systems are Trinity Highway
systems.
WARNINGS
Ensure the Cable Anchor Bracket Angle is hooked over the MATT™
CR Post 1 Top
.
Failure to follow these warnings could result in serious injury or
death in the event of a vehicle impact with the system.
POST 2
POST 1