Trinity Highway MATT, Инструкция по сборке

Страница: 21 / 44

TrinityHighway.com
February 2022
STEP 2D
MATT™ Line Post w/ Soil Plate W-Shaped
Assembly for Post 6
PARTS INSTRUCTIONS
N 628270G 1 EA
Reference: SS-6288
1. Assemble the MATT™ Soil Plate W-Shape (Part NN) to the downstream
side of the 6’-0” [1.829 m] MATT™ System Line Post 6 (Part N) as shown
above using specified hardware (Parts BB, OO).
2. Tighten all threaded hardware to a snug position with a minimum of two (2)
bolt threads protruding beyond the nut.
3. Assemble the 6’-0” [1.829 m] MATT™ System Line Post with Soil Plate W-
Shaped on the downstream side of the post 32” [813 mm] (+1”, -0”) [+25
mm, -0 mm] from finished grade as shown above for Post 6 at location
established in Step 1.
BB 3340G 2 EA
NN 628269G 1 EA
OO 113660G 2 EA
Use only Trinity Highway parts that
are specified herein for the MATT™
for assembling, maintaining, or
repairing the MATT™. Do not
utilize or otherwise commingle
parts from other systems even if
those systems are Trinity Highway
systems.
WARNINGS
Ensure the MATT™ Soil Plate W-Shaped is on the downstream
side of MATT™ System Line Post 6.
Ensure the Post spacing is as established in Step 1.
Ensure threaded hardware is tightened to a snug position with a
minimum of two (2) bolt threads protruding beyond the nut.
Failure to follow these warnings could result in serious injury or
death in the event of a vehicle impact with the system.
MATT™ Soil Plate W-
Shaped may be rotated in
either direction but must be
on downstream side of post.