Trinity Highway MATT, Инструкция по сборке

Страница: 32 / 44

TrinityHighway.com
February 2022
STEP 12
MATT™ 10 Gauge Head Rail Assembly
1’-9 3/4” [552 mm]
PARTS INSTRUCTIONS
F 628339A 2 EA
Reference: SS-6288
1. Assemble the MATT™ 10 Gauge Head Rail (Part F), 1’-9 3/4” [552 mm] to
the MATT™ 10 Gauge Slotted Front Guardrail-1 as shown above for both
sides using specified hardware (Parts W, CC, EE, Z).
2. Ensure the two Upstream holes in the MATT™ Double Spacer are used to
assemble the MATT™ 10 Gauge Head Rail and MATT™ 10 Gauge Slotted
Front Guardrail-1.
3. Ensure the MATT™ 10 Gauge Head Rail is lapped to the outside of the
MATT™ 10 Gauge Slotted Front Guardrail-1.
4. Assemble all hardware loosely ensuring bolt is seated for this step.
W 118614G 8 EA
Z 3361G 8 EA
CC 4902G 8 EA
EE 118615G 8 EA
Use only Trinity Highway parts that
are specified herein for the MATT™
for assembling, maintaining, or
repairing the MATT™. Do not
utilize or otherwise commingle
parts from other systems even if
those systems are Trinity Highway
systems.
WARNINGS
Ensure the MATT™ 10 Gauge Head Rail is lapped to the outside
of the MATT™ 10 Gauge Slotted Front Guardrail-1.
Ensure the two
Upstream holes in the MATT™ Double Spacer ae
used to assembled the MATT™ 10 Gauge Head Rail.
Failure to follow this warning could result in serious injury or death
in the event of a vehicle impact with the system.
POST 1
Note: The assembly shown
for one side of the post is
required for both sides of
the post.
NOTE: Part EE is a
5/8” diameter, 1/4”
thick flat washer.
Assemble all hardware
loosely ensuring bolt is
seated for this step.