Manual LCO EXC3/ADV3 OTD | 03-2020 | 1.2 | en
DSI
c
48 / 63
DSI (only EXC3)
Description
DSI (Digital Serial Interface) enables DSI LED Driver to be controlled. The DSI line can be wired separately via a two-core cable or
together with the mains cable in a five-core cable. Communication is not impaired by the mains cable. In contrast to DALI, there is no
individual addressing of the LED Drivers with DSI.
DSI offers a series of benefits:
The main benefits of DSI are the optimization of energy consumption of extensive groups of luminaires (e.g. in sports stadiums and
factories).
Commissioning
Further information can be found in the DALI Handbook (see
).
http://www.tridonic.com/com/en/download/technical/DALI-manual_en.pdf
Activating and adjusting the DSI function via masterCONFIGURATOR
The DSI function can be activated and adjusted via the masterCONFIGURATOR.
Further information can be found in the masterCONFIGURATOR manual (see
http://www.tridonic.com/com/en/download/Manual_masterConfigurator_en.pdf
...
Expansion options via submodules, for example in combination with daylight control or additional switch modules
_
Wiring: Simple wiring with five pole standard cables and line length of up to 250 meters
_
Wiring: Polarity-free control lines can be used for mains and control lines
_
Wiring: Multiple wiring possibilities (star, series and mixed wiring)
_
Unaffected by electrical interference
_
Uniform light level from the first to the last light source
_
reverse polarity protected connection: can be connected with any polarity
_
I
NOTICE
If the corridorFUNCTION is activated, the LED Driver is controlled only by motion. To operate the LED Driver via DALI, DSI or
switchDIM, the corridorFUNCTION must be deactivated.
