Tridonic ADV3 OTD, Руководство по эксплуатации продукта

Страница: 12 / 63

Manual LCO EXC3/ADV3 OTD | 03-2020 | 1.2 | en
Adjustable output current
c
12 / 63
Adjustable output current EXC3
The output current can be adjusted via NFC, DALI V2-DT6, ready2mains
Adjustable output current ADV3
The output current can be adjusted via NFC, ready2mains
Adjusting the output current via DALI or ready2mains
Further information about DALI (see ) or ready2mains (see ) can be found in the corresponding DALI , p. 54 ready2mains , p. 56
function description of the DALI manual (see ). Reference list , p. 62
Adjusting the output current via NFC
The NFC Interface allows wireless communication with the LED Driver. This interface offers the option to write configuration and to
read configuration, errors and events with the companionSUITE.
A correct communication between the LED Driver and the NFC antenna can only be guaranteed if the Driver is directly placed on the
antenna.
Any material placed between the LED Driver and the NFC antenna can cause a deterioration of the communication quality. We
recommend the use of following NFC antennas:
www.tridonic.com/nfc-readers
NFC is compliant with ISO/IEC 15963 standard.
Output voltage
The output voltage range results from the selected current. More information can be found in the data sheet (see Reference list , p.
). 62
The output current can be adjusted via NFC, DALI (only EXC3) or ready2mains. The diagrams below show the forward voltage ranges
as a function of the output current and are intended as a guide.
For detailed values and an explanation of the methods available please refer to the data sheets (see
). Reference list , p. 62
...