Transition Networks SwitchMaster MSB-E6/X2, Руководство пользователя

Страница: 49 / 64

Bringing Up the SwitchMaster™ Bridge Download Software
To bring up the SwitchMaster™ Bridge download software:
1. Use a small screwdriver, bent paper clip, or other small device to reset
the SwitchMaster™ Bridge by depressing the internal reset switch.
The Status Indicators cycle through initial diagnostic patterns, then the
upper four status LEDs flash continuously to indicate that the
SwitchMaster™ Bridge software is ready to accept user input.
2. While the upper Status LEDs are flashing continuously, at the attached
ASCII terminal, press the <space> key.
The X MODEM FILE DOWNLOAD MENU comes up:
NOTE: If there is no keyboard entry while the upper Status LEDs are
flashing continuously, the SwitchMaster™ Bridge continues onto normal
Phase 2 operation.
5-7
EIGHT SEGMENT BRIDGE
5. MAINTENANCE
TM
SwitchMaster
Eight Segment Bridge
Reset
Power Status
Serial
Segment 1 Segment 2 Segment 3 Segment 4 Segment 5 Segment 6
RX RX RX RX RX RX
TX TX TX TX TX
TX
COL
LINK
COL
LINK
COL
LINK
COL
LINK
COL
LINK
COL
LINK
X Slot 2 X Slot 1
AUI
Status
Reset
n e t w o r k s
T R A N S I T I O N
Transition Engineering Inc. (c) 1994, 1995
0 ==> Continue Bootup Process
1 ==> Change BAUD rate
2 ==> Standby For a Modem Connection
3 ==> Download BOOTP code using XMODEM/CRC
4 ==> Download BOOTP code using XMODEM
5 ==> Download TE/OS code using XMODEM/CRC
6 ==> Download TE/OS code using XMODEM
7 ==> Reset SwitchMaster
ENTER CMD ==>
SwitchMaster :: 8 Port Switching System
Console Port Activated
X MODEM FILE DOWNLOAD MENU