TransCore encompass 4, Руководство пользователя

Страница: 146 / 208

Chapter 7 Commands
TransCore Proprietary
7–129
Table 40 Input Inversion Options
Command Option
6940 Disable input inversion (factory default)
6941 Enable input inversion
Reader response:
Done
695S...S Set Serial Number
See “505 Display Software Version” on page 7–102.
Command #695 assigns the reader serial number according to the format:
695SSSSSS
where
SSSSSS
is the serial number.
The serial number may contain as many as six uppercase or lowercase ASCII alphanumeric characters.
Note:
The factory-assigned serial number of the reader contains eight characters. However, to
maintain backward compatibility, the reader software allows only six characters to be entered.
When setting the serial number, skip the first and fourth character of the seven-character number
shown on the reader product label.
Note: Once assigned, the serial number is preserved during power-down and the loading of default
parameters.
Reader response:
Done
696S...S Store Hardware Configuration String
See “506 Display Hardware Configuration Information” on page 7–102.
Command #696S...S stores hardware configuration information into reader memory.
The hardware configuration string is assigned according to the following format:
696S...S
where
S...S the hardware configuration string that may contain as many as 20 uppercase or
lowercase ASCII alphanumeric characters.
Note:
Once assigned, configuration information is preserved during power-down and the loading of
default parameters.