TransCore encompass 4, Руководство пользователя

Страница: 48 / 208

2. The tag can be attached to any flat or slightly curved surface made of glass, metal, or plastic. For best
results, find a location where the back of the tag makes maximum contact with the surface, close to the
centerline of the vehicle.
3. Once you have identified a location for the tag, prepare the area where the tag will be installed. The
ideal temperature range for mounting the tag is between 70°F to 100°F. Dust, grime, or greasy residue
can adversely affect the bond strength of the adhesive on the tag.
4. Clean and degrease the tag installation area with solvent or cleaner. Dry the area thoroughly using a
clean, dry cloth.
5. Remove the backing from both of the adhesive strips located on the back of the tag, as shown in
Figure 23 .
6. Position the tag over the installation area.
7. Press both ends of the tag firmly against the mounting surface.
8. Allow the adhesive to cure for a minimum of one hour to ensure a firm bond.
Hang Tags
Hang tags are designed to hook over a rear-view mirror post. The tag must be displayed on the post in
order for it to function correctly. The tag may not be read if it is placed on the dashboard or held or taped
against the interior windshield.
Store the hang tag in the glovebox any time it is not in use.
Figure 22 Guidelines for exterior tag placement
Figure 23 Removing adhesive strip backing
Chapter 3 Choosing, Installing, Removing Tags
TransCore Proprietary
3–31