TransCore encompass 4, Руководство пользователя

Страница: 128 / 208

Chapter 7 Commands
TransCore Proprietary
7–111
Reader message:
TT <0 to 1>
where
0
tag translation mode disabled
1 tag translation mode enabled
537 Display Echo Status
Command
#537
displays echo mode status. In basic protocol (
#610 Select Basic Protocol
), the
reader may be configured to enable (
#6171 Enable Echo Mode
) or disable (
#6170 Disable Echo
Mode)
the echo of received commands. Refer to sections “6170 Disable Echo Mode” on page 7–115 and
“6171 Enable Echo Mode (Factory Default)” on page 7–116 for more information.
Reader message:
ECHO <0 to 1>
where
0
Echo status disabled
1 Echo status enabled (factory default)
540 Display Flash Checksum
Command
#540
displays the flash memory checksum.
Reader message:
PCKS I0000 Exxxx
where
0000
Not applicable to the Encompass 4 Reader
xxxx Represents the four-byte ASCII representation of the flash memory checksum
543 Display Boot Checksum
Command
#543
displays the boot ROM checksum.
Reader message:
BCKS xxxx
where
xxxx represents the four-byte ASCII representation of the boot ROM checksum.
549 Display User-Programmable Group Select Equals (GSE) Filter Data
See “697 Set User-Programmable Group Select Equals (GSE) Filter” on page 7–130.