TransCore encompass 4, Руководство пользователя

Страница: 187 / 208

Appendix D Command Quick Reference
This appendix lists the default configuration settings for the Encompass® 4 Reader
and its commands. Commands are listed both numerically and alphabetically.
Command Syntax
The command numbers consist of from 2 to 4 hex digits. The letters N or S may follow a command number.
The letter N indicates that part of the command number is variable. The letter S indicates the requirement for
an alphanumeric data string that is to be included immediately following the command number. Hex digits
(0–9, A–F) in either uppercase or lowercase characters may be used in data strings and for hex digits A–F.
For more information see “Chapter 5 General Software Information” on page 5–67.
Table 55 lists factory default settings. Table 56 lists, in numerical order, all of the commands available to
users. Table 57 lists the same commands by command name.
Factory Default Settings
Note: Table 55 lists the factory default settings for the Encompass 4 Reader.
Table 55 Encompass 4 Reader Default Configuration Settings
Parameter Setting Command
Switch to data mode Data 00
Baud rate 9600 1005
Stop bits 1 1010
Disable parity None 1020
Time and date appended Enabled 302
No auxiliary information appended Disabled 310
EAC page append Disabled 320
Unique ID code criteria Separation of 1 ID 4100
Valid ID code criteria Acquisition of 1 ID 4200
Uniqueness timeout 2 minutes 441
Wiegand mode Disabled 450
Tag translation mode Disabled 452
Multi-tag sort Disabled 454
eGo Plus tag initialization during multi-tag
sort
Enabled 456
Second alternate group select Disabled 458
Appendix D Command Quick Reference
TransCore Proprietary
D–1