TransCore encompass 4, Руководство пользователя

Страница: 109 / 208

Encompass 4 Reader System Guide
TransCore Proprietary.
7–92
30N Append Time and Date Selection
Command #30N selects the option of appending the time and date to transmitted IDs, error messages,
presence without tag reports, and input status change reports. The factory default setting is time and date
appended (Command #302 ).
The reader returns an Error message if its tag buffer contains data. The reset reader command #63 may
be transmitted to clear the buffer; however, tag ID data will not be reported. If this is unacceptable, allow
the buffer to empty before re-issuing append time and date command #30N. Append Time and Date
commands are shown in Table 20 .
Table 20 Append Time and Date Commands
Command Append Option
300 No time and date appended
302 Time and date appended (factory default)
The reader transmits messages with time and date appended as follows. One space separates the time
from the date.
<string>&<HH:MM:SS.hh MM/DD/YY>
where
string
is a tag ID, error message, or report.
&
separates <string> from the time and date.
HH:MM:SS is the time delimiter.
MM/DD/YY is the date delimiter.
Reader response:
Done
31N Append Auxiliary Information Selection
Command #31N selects the option of appending auxiliary information to transmitted IDs, presence-without-
tag reports, and input status change reports. Auxiliary information is not appended to error messages.
The factory-default setting is no auxiliary information appended. The N variable specifies whether or not
auxiliary information is to be appended. Append Auxiliary Information commands are shown in Table 21 .
Table 21 Append Auxiliary Information Commands
Command Append Option
310 No auxiliary information appended (factory default)
311 Auxiliary information appended