9
USER MENU PROCEDURES
This section provides instructions for all of the User Menu procedures.
ID Number Entry (A8)
1. While in the User Menu mode, scroll to "A 8", and then scroll down once using the ZERO key to
enter the ID Number menu.
2. The display will momentarily show "ID NO", followed by a value with one flashing digit. This
value will be the current ID number value.
3. Use the four directional keys (shown below) to adjust the displayed value to the actual ID
Number value. Increase the flashing digit by pressing the UNITS key. Decrease the flashing digit
by pressing the ZERO key. Pressing the PRINT key or the TARE key will change the position of
the flashing digit.
4. After setting the exact value, press the NET/GROSS key to save the ID Number value. The
display will show "SET" momentarily, and then revert back up to A8.
LF (Line Feeds) Number Entry (A9)
1.
While in the User Menu mode, scroll to "A 9", and then scroll down once using the ZERO key to
enter the Line Feeds menu.
2.
The display will momentarily show "LF", followed by the current line feeds value.
3.
Use the four directional keys shown above to adjust the displayed value to the actual line feeds
value. Increase the flashing digit by pressing the UNITS key. Decrease the flashing digit by
pressing the ZERO key. Pressing the PRINT key or the TARE key will change the position of the
flashing digit.
4.
After setting the exact value, press the NET/GROSS key to save the line feeds value. The
display will show "SET" momentarily, and then revert back up to A9.
EXITING THE MENUS
Exit any configuration menu by moving the slide switch to its original position. The display will go through
a digit check, and then settle into Normal Operating mode. All front panel keys will now return to their normal
mode of operation.
Содержание TI-500 Plus
Страница 22: ...i TI 500E Plus Digital Weight Indicator Setup Operation Manual Revision 1 2 September 16 2011...
Страница 44: ...i Digital Weight Indicator Setup OperationManual Revision 1 1 April 6 2009...
Страница 62: ...TI 500E Digital Weight Indicator Setup Operation Manual Revision 3 0 July 6 2012...