Transcell Technology TI-500 Plus, Руководство по установке и эксплуатации

Страница: 49 / 82

4
CONFIGURATION
OVERVIEW
The indicator contains two main configuration menus:
The Setup (“F”) menu, which configures the indicator to your weigh platform
The User (“A”) menu, which configures the serial communication port and enables some user
options
The Setup and User menus consist of several menu selections, each with its own sub-menu of selections
or programming procedures. To configure the indicator you must first enter the appropriate menu mode.
Once there, four of the front panel keys become directional navigators to move around in the menus, and
one key is used to save or SET the selections.
ACCESSING THE MENUS
To access the Setup (“F) menu:
1. Power off the indicator.
2. Press and hold the “SET” key for about three seconds while turning the unit back on.
The display shows ” F 1” to indicate that you are in Setup Menu mode.
3. Use the navigation keys shown in the below to move through the menu.
SETUP MODE KEY FUNCTIONS
ZERO
GROSS
NET
TARE PRINT
SET
UNITS
To access the User (“A) menu:
1. Enter the Setup (“F”) menu.
2. Use the right or left directional keys shown above to move right or left in the Setup (“F”) menu
until the indicator shows ” A 1”.