Trans-Cal SSD120-N-RS5, Инструкция для владельца и по установке, Страница: 38 / 57

Tables IX and X Serial Data Connector and Protocol Selection
Table IX
SSD120-(XX)N-RS5 Serial Data Port Receptacle, DA-15S
Pin Function
1
Ground
15
Page 38 of 57
2
Ground for 10' resolution.
3
RxD (Calibration Only)
4 Ground
15
Ground
15
5
TxD1 (Group A)
16
6
Ground
15
7
TxD2 (Group A)
16
8
9
Protocol
10
Protocol
Ground
15
11
TxD3 (Group A)
16
12
Ground
15
13
TxD4 (Group B)
16
14
15
TxD5 (Group B)
16
Table X
SSD120-(XX)N-RS5 Protocol Selection: DA-15S D-Sub Serial Data Receptacle Function Table
Pin Pin
Protocol Selection 2 9
Pin
10
UPS AT 100' resolution, 1200bps.
UPS AT 10' resolution, 1200bps.
Open
Gnd.
Open
Open Open
Open
Trimble/Garmin, 100' resolution, 9600bps.
Trimble/Garmin, 10' resolution, 9600bps.
Open
Gnd.
Open
Open Gnd.
Gnd.
Northstar/Garmin, 100' resolution, 2400bps.
Northstar/Garmin, 10' resolution, 2400bps.
Open
Gnd.
Gnd.
Gnd. Open
Open
Magellan, 100' resolution, 1200bps.
Magellan, 10' resolution, 1200bps.
Open
Gnd.
Gnd.
Gnd. Gnd.
Gnd.
ARNAV Systems (Software selectable ONLY)
Open Open Open
UPS AT 618 Loran Systems (Software selectable
ONLY)
Open Open Open
15
Pins 1, 4, 5, 7, 11, and 13 are internal grounds provided for protocol selection and serial data ground.
16
TxD1, TxD2, TxD3, TxD4 and TxD5 are five (5) RS232 outputs which will transmit the protocol selected by grounding the pins above, or will
transmit separate protocols in two groups as assigned via software, see
§4.6 Serial Port Software Configuration.