manualshive.com logo in svg

Trane RTAA-100, Инструкция по установке и обслуживанию

Поделиться
Скачать
Trane RTAA-100 Скачать руководство пользователя страница 2

2

RTAA-SVX01A-EN

 

Important 
Environmental Concerns!

Scientific research has shown that certain man-made chemicals 
can affect the earth’s naturally occurring stratospheric ozone layer 
when released to the atmosphere. In particular, several of the 
identified chemicals that may affect the ozone layer are 
refrigerants that contain Chlorine, Fluorine and Carbon (CFCs) and 
those containing Hydrogen, Chlorine, Fluorine and Carbon 
(HCFCs). Not all refrigerants containing these compounds have 
the same potential impact to the environment. Trane advocates 
the responsible handling of all refrigerants—including industry 
replacements for CFCs such as and HCFCs and HFCs. 

Responsible Refrigerant Practices!

Trane believes that responsible refrigerant practices are important 
to the environment, our customers, and the air conditioning 
industry. All technicians who handle refrigerants must be 
certified. The Federal Clean Air Act (Section 608) sets forth the 
requirements for handling, reclaiming, recovering and recycling of 
certain refrigerants and the equipment that is used in these 
service procedures. In addition, some states or municipalities 
may have additional requirements that must also be adhered to 
for responsible management of refrigerants. Know the applicable 
laws and follow them.

 

WARNING

Contains Refrigerant!

System contains oil and refrigerant under high pressure. Recover 
refrigerant to relieve pressure before opening the system. See 
unit nameplate for refrigerant type. Do not use non-approved 
refrigerants, refrigerant substitutes, or refrigerant additives.

Failure to follow proper procedures or the use of non-approved 
refrigerants, refrigerant substitutes, or refrigerant additives could 
result in death or serious injury or equipment damage.

NOTICE:  

Warnings and Cautions appear at appropriate sections through-

out this literature. Read these carefully.

 

WARNING:

  Indicates a potentially hazardous situation which, if not 

avoided, could result in death or serious injury.

 

CAUTION:

 Indicates a potentially hazardous situation which, if not 

avoided, may result in minor or moderate injury. It may also be used to 
alert against unsafe practices.

CAUTION:

  Indicates a situation that may result in equipment or property-

damage only accidents.

Содержание RTAA-100



















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды