CTV-SVU02A-EN
9
Introduction
Main Display Area/Home Screen
All screens appear within the main display area (shown as location
in
Figure 1, p. 7
)
.
Home screen: Chiller status information
The home screen (
Figure 1, p. 7
) provides the most frequently needed chiller status information on
“touch targets” (the entire white rectangular areas) for each chiller component. Touching any touch
target displays a screen containing more chiller status information related to each component (see
“Component Screens,” p. 12
).
Each touch targets that appears on the home screen is described in
Table 2
.
In the lower right corner of the home screen, you can view the date and time as well as additional
chiller information. For details, see the last three rows of
Table 2
.
2
Table 2.
Home screen touch targets and buttons
Touch target
Description
This compressor touch target chiller provides information on:
• Compressor Running Status
• Differential Oil Pressure
Touch anywhere on the touch target to view the Compressor component
screen.
This condenser touch target provides information on:
• Condenser leaving water temperature
• Condenser entering water temperature
• Active hot water setpoint (if hot water control is available)
• Condenser water flow (animation in graphic indicates if condenser is
running)
Touch anywhere on the touch target to view the Condenser component
screen.
The evaporator touch target provides information on:
• Evaporator leaving water temperature
• Evaporator entering water temperature
• Active chilled water setpoint (if chilled water control is available)
• Evaporator water flow (animation in graphic indicates if evaporator is
running)
Touch anywhere on the touch target to view the Evaporator component
screen.
