54
CTV-SVU02A-EN
Security Settings
Logging In
There are two levels of security:
•
Security Level 1 allows users to change a limited group of secure settings. The default security
PIN is 1111.
•
Security Level 2 allows users to change all secure settings. The default security PIN is 7123.
A technician must use the Tracer TU service tool to define a different PIN, or to recall a PIN that has
been forgotten. When defining a PIN in Tracer TU, the technician enters a 4-digit PIN that
corresponds with the desired level of security.
To log in:
1.
Touch the
Log in
button. The Log in screen appears (
Figure 34
).
2. Use the keypad to enter your PIN.
•
The PIN is a four-digit number, which was configured for your system with the Tracer TU
service tool.
•
As you enter the number, the PIN remains hidden by asterisks.
Note:
If you enter an invalid PIN, an error message appears on the Log in screen.
3. Touch
Save
.
•
If you viewed the Log in screen from touching
Log in
on the Settings screen, the Settings
screen appears with a
Log out
button on it.
•
If the Log in screen appeared when you tried to change a setting, you return to that setting
screen.
Note:
The PIN is valid until 30 minutes of inactivity passes, or until you log out.
Figure 34. Log In Screen
