Trackmaster TMX58, Руководство пользователя

Страница: 43 / 66

TRACKMASTER
August 2013
Component Replacement
Use only TRACKMASTER
your warranty and may cause your
Utilisez uniquement
d'autres pièces
dysfonctionnement.
Turn the main power switch to OFF, and disconnect the
its power outlet.
Tournez le commutateur
tapis roulant de la prise
Running Deck Removal
The running deck features (2) wear surfac
the part
. This procedure requires the following tools:
• ¼-in. Allen wrench
•
3
/
16
-in. Allen wrench
1.
Remove the two running belt
2. Push rear
possible.
3. Lift the outside edges of the running belt. On each side of the running
three bolts that hold the running deck to the cushioned supports.
4. Remove all six Allen
5. To remove the running deck, slide it
on the left side, (v
slide the running
6. Reassemble the running
Component Replacement
TMX58 Owner’s Manual
Component Replacement
TRACKMASTER
®
replacement parts. Using other parts
your warranty and may cause your
TRACKMASTER
®
to malfunction.
Utilisez uniquement des pièces de rechange TRACKMASTER
pièces annule la garantie et peut causer votre TRACKMASTER
dysfonctionnement.
urn the main power switch to OFF, and disconnect the
its power outlet.
Tournez le commutateur d'alimentation principal sur OFF
de la prise de courant.
Removal
The running deck features (2) wear surfaces and may be flipped over, doubling the life of
This procedure requires the following tools:
in. Allen wrench
in. Allen wrench
Remove the two running belt-tensioning bolts, and set bolts and end caps aside.
roller against the running deck to provide as much belt slack as
Lift the outside edges of the running belt. On each side of the running
three bolts that hold the running deck to the cushioned supports.
Remove all six Allen-head bolts (three per side)
To remove the running deck, slide it to the right side of the treadmill and lift up
on the left side, (v-belt side), until the left edge is above the side frame. Now
running deck out of the treadmill.
Reassemble the running deck by reversing the preceding five steps.
Component Replacement
8-1
replacement parts. Using other parts will void
to malfunction.
TRACKMASTER
®
. L'utilisation
TRACKMASTER
®
à un
urn the main power switch to OFF, and disconnect the treadmill from
et débranchez le
, doubling the life of
tensioning bolts, and set bolts and end caps aside.
roller against the running deck to provide as much belt slack as
Lift the outside edges of the running belt. On each side of the running deck are
three bolts that hold the running deck to the cushioned supports.
to the right side of the treadmill and lift up
belt side), until the left edge is above the side frame. Now
y reversing the preceding five steps.
8