TRACKMASTER
Set-up Instructions
August 2013
TMX58 Owner’s Manual
5-1
Assembly and Setup
TRACKMASTER
®
treadmills are shipped fully assembled and packaged in a knock down condition. They
are designed to pass through a standard 36” door opening measuring at least 35½”. It will be necessary to
remove the door from the jam in most cases if the door is not capable of opening fully parallel to door
opening. After you have unpacked the treadmill and secured the handrail assembly to the frame, move the
treadmill to the area by rolling it on its front wheels. If your treadmill must pass through a door opening
less than 36”wide, additional disassembly will be required. This task should be performed by an authorized
service provider to ensure that the TRACKMASTER
®
is properly reassembled and functioning correctly.
Safe Handling Guidelines
Do not attempt to move the treadmill with the handrails in the shipping position due to the
possibility of cutting the internal wiring. You must either fully secure the handrails in their proper
position or secure handrails with 3/8-16 bolt in the folded position. Lift the end of the bed
assembly to a comfortable height, keeping knees bent and back straight as you lift.
Rotate the treadmill in the direction you want to go (the treadmill will pivot on its wheels) and
push forward.
When you have maneuvered the treadmill into its location, gently lower the end of the bed
assembly to the floor.
The TRACKMASTER
®
weight is 425lbs. This requires 2 people to safely remove
it from the pallet and locate it in the facility.
If you are moving the treadmill over rough surface, such as pavement, use a
dolly under front of the treadmill to prevent damage to the wheels and lift
mechanism
.
Le TRACKMASTER
®
pèse 193 kg ce qui exige 2 personnes pour le soulever de
la palette et l’installer en toute sécurité
.
Si vous déplacez le tapis roulant sur une surface rugueuse, comme trottoir,
utiliser un chariot sous l'avant du tapis roulant pour éviter d'endommager les
roues et mécanisme de levage.
5
Содержание TMX58
