Trackmaster TMX58, Руководство пользователя

Страница: 25 / 66

TRACKMASTER Set-up Instructions
August 2013 TMX58 Owner’s Manual 5-3
Figure 5-3
5. Connect electrical connections from
the back of the console to the
connectors within the handrail cross
brace.
6. Attach the console to the console
supports with the hardware supplied
in the order shown in Figure 5-3.
Ensure the rubber pads are placed
between the steel mounting surface
and the back of the console. Tighten
bolts evenly.
7. Position the black cover and align
the holes in the side of the mount
with those in the cover. Secure cover
with (4) #10-32 screws.
Location
Place the TRACKMASTER
®
on a firm and level hard surface that is free of tile grout
lines. The illustration below shows the minimum recommended clearances from the
treadmill edges to any obstruction for dismount and safety purposes.
The TRACKMASTER
®
conforms to FCC class A rating for electromagnetic emissions.
It is recommended not to place the treadmill closer than 5ft. (1.5m) from sensitive
electronic devices within the room or in an adjacent room. If an interference problem
occurs, move the treadmill farther away from the sensitive device or relocate either
device to another area, or consult with an EMI specialist for ways to shield the room
from electromagnetic radiation.
Do not place it on thick or long-pile carpeting. Such carpeting could cause instability or
static build-up, and carpet fibers could get caught in the belt and damage the unit.
Ensure that power cords do not cross traffic areas. Exposed power cords can cause a
fall, resulting in injury.
Keep it away from sources of moisture, such as spas or fountains. Moisture can cause
the electronic circuitry to malfunction.
6 ft. / 182.8 cm
3 ft. / 91.4 cm
3 ft. / 91.4 cm 5 ft. / 1.5m
1 ft. / 91.4 cm