Trackmaster TMX58, Руководство пользователя

Страница: 41 / 66

TRACKMASTER Preventive Maintenance
August 2013 TMX58 Owner’s Manual 7-5
NOTE: The drive belt may stretch and loosen with regular use. This looseness may
result in a flapping noise under the hood
.
1. Remove the (3) #10-32 screws located on the bottom hood with
1
/
8
” Allen
wrench.
2. With the ¾” socket and wrench loosen the TENSION ADJUSTMENT back
nut.
3. Measure from the head of the ½”-13 bolt to the motor housing the spring
compression should be 1-3/16” or 30mm.
4. Using a ¾” wrench turn the TENSION BOLT clockwise to compress the
spring. To decrease compression, turn the wrench counter clockwise.
5. When the spring is compressed to 1-3/16” or 30mm, tighten the TENSION
ADJUSTMENT back nut.
NOTE: Failure to lock the TENSION ADJUSTMENT back nut will allow the drive
belt tension to become loose.
6. When the treadmill is properly adjusted, reinstall the hood with (3) #8-32
screws.
TENSION BOLT
1-3/16” OR 30mm SPRING
COMPRESSION
TENSION
ADJUSTMENT
Back Nub
Exterior Care
The powder-coat finish on your TRACKMASTER
®
is an extremely durable
finish and requires minimal care. Do not allow perspiration to build up on
your treadmill. Wipe the unit daily.