TR-Electronic A**65 Series, Руководство пользователя

Страница: 53 / 55

Printed in the Federal Republic of Germany

TR-Electronic GmbH 2011, All Rights Reserved
06/28/2017 TR - ECE - BA - DGB - 0084 - 05 Page 53 of 55
4.3.3 For the position output valid parameters
Start and final value in steps:
With the parameters
start value in steps
and
final value in steps
it
can be defined the pos-range within the programmed
total number of steps
.
Thereby the start value must be defined smaller than the final value and the final value
smaller than the maximum position value.
Start and final value in µA:
With the parameters
start value in µA
and
final value in µA
it can be
defined the I-range within the maximum current values. Thereby the start value must
be defined smaller than the final value.
Example:
Figure 11: Definition of the active range (current / position)
Legend
I
O
= actual measured output current [mA]
I
max
= maximal possible output current [mA]
I
SV
= programmed
start value
of the current
in µA
I
FV
= programmed
final value
of the current
in µA
Pos = actual position of the measuring system [steps] *
Pos
max
= by the parameter
total number of steps
programmed
measuring length plus the
origin type
*
Pos
SV
= programmed
start value
of the position
in steps
*
Pos
FV
= programmed
final value
of the position
in steps
*
* signed