53
Chapter 4
Configure the Router in Wireless Router Mode
MTU. But this is rarely required, and should not be done unless you are sure it is
necessary for your ISP connection.
•
Enable MLD Proxy
- Enable the Multicast Listener Discovery (MLD) Proxy
function if you need.
•
Set IPv6 DNS Server manually
- If your ISP gives you one or two DNS IPv6
addresses, select
Set IPv6 DNS Server manually
and enter the
IPv6 DNS Server
and
Secondary IPv6 DNS Server
into the correct fields. Otherwise, the DNS
servers will be assigned from ISP dynamically.
Note:
If you get Address not found error when you access a Web site, it is likely that your DNS servers are set up
improperly. You should contact your ISP to get DNS server addresses.
Static IPv6
•
IPv6 Address
- Enter the IPv6 address provided by your ISP.
•
Prefix Length
- The length of IPv6 address prefix.
•
IPv6 Gateway
- Enter the default gateway provided by your ISP.
•
IPv6 DNS Server
- Enter the DNS IPv6 address provided by your ISP.
•
Secondary IPv6 DNS Server
- Enter another DNS IPv6 address provided by
your ISP.
•
MTU(Bytes)
- The normal MTU (Maximum Transmission Unit) value for most
Ethernet networks is 1500 Bytes. For some ISPs, you may need to modify the
MTU. But this is rarely required, and should not be done unless you are sure it is
necessary for your ISP connection.
•
Enable MLD Proxy
- Enable the Multicast Listener Discovery (MLD) Proxy
function if you need.
Downloaded from