TP-Link TL-WR802N Скачать руководство пользователя страница 118 | Manualshive

Страница: 118 / 186

TP-Link TL-WR802N Скачать руководство пользователя страница 118

114

Chapter 5

Configure the Router in WISP Mode (Hotspot Mode)

• To backup configuration settings:

Click

Backup

to save a copy of the current settings in your local computer. A “.bin“ file

of the current settings will be stored in your computer.

• To restore configuration settings:

1. Click

Choose File

to locate the backup configuration file stored in your computer, and

click

Restore

.

2. Wait a few minutes for the restoring and rebooting.

Note:

During the restoring process, do not power off or reset the router.

5. 16. 6. Reboot

Some settings of the router will take effect only after rebooting, including:
•  Change the LAN IP Address (system will reboot automatically).
•  Change the DHCP Settings.
•  Change the Working Modes.
•  Change the Web Management Port.
•  Upgrade the firmware of the router (system will reboot automatically).
•  Restore the router to its factory defaults (system will reboot automatically).
•  Update the configuration with the file (system will reboot automatically).
1. Visit

http://tplinkwifi.net

, and log in with the username and password you set for the

router.

2. Go to

System Tools

>

Reboot

.

• To reboot manually

Click

Reboot

, and wait a few minutes for the router to rebooting.

Downloaded from

«
...
116
117
118
119
120
...
»

Содержание TL-WR802N



























































































































































































Отзывы:

Нет отзывов