manualshive.com logo in svg

TP-Link TL-WR802N, Руководство пользователя, Страница: 113 / 186

Поделиться
Скачать
TP-Link TL-WR802N Скачать руководство пользователя страница 113

109

Chapter 5

 

Configure the Router in WISP Mode (Hotspot Mode)

• 

PPP Username/Password

 - Enter the User Name and Password provided by 

your ISP. These fields are case-sensitive.

• 

Authentication Type

 – Choose one authentication type from AUTO-AUTH, PAP, 

CHAP and MS-CHAP.

• 

Addressing Type

 - There are two types of assignation for IPv6 address: 

SLAAC (Stateless address auto-configuration) and DHCPv6 (Dynamic Host 
Configuration Protocol for IPv6) Server.

• 

MTU(Bytes)

 - The normal MTU (Maximum Transmission Unit) value for most 

Ethernet networks is 1500 Bytes. For some ISPs, you may need to modify the 
MTU. But this is rarely required, and should not be done unless you are sure it is 
necessary for your ISP connection.

• 

Enable MLD Proxy

 - Enable the Multicast Listener Discovery (MLD) Proxy 

function if you need.

• 

Use IPv6 address specified by ISP

 - Input a static IPv6 address from the ISP.

• 

Set IPv6 DNS Server manually

 - Enter the IP address of the IPv6 DNS server 

and secondary IPv6 DNS server.

Tunnel 6to4

  

• 

WAN Connection

 - Display the available wan connection.

5. 15. 3.  IPv6 LAN

1. 

Visit 

http://tplinkwifi.net

, and log in with the username and password you set for the 

router.

2. 

Go to

 IPv6 

>

 IPv6 LAN

 and configure the IPv6 LAN settings as needed.

Downloaded from 

ManualsNet.com

 search engine

Содержание TL-WR802N



























































































































































































Отзывы:

Нет отзывов