manualshive.com logo in svg

TP-Link TL-WR802N, Руководство пользователя, Страница: 141 / 186

Поделиться
Скачать
TP-Link TL-WR802N Скачать руководство пользователя страница 141

137

Chapter 6

 

Configure the Router in Access Point Mode

6. 7. 2.  SNMP Settings

Enable this function if you want to have remote control through SNMPv1/v2 agent with 
MIB-II.
1. Visit 

http://tplinkwifi.net

, and log in with the username and password you set for the 

router.

2. Go to 

System Tools

 > 

SNMP Settings

.

3. Select 

Enable

, configure the parameters and click 

Save

.

• 

System Name

 - An administratively-assigned name for this managed node.

• 

System Description

 - The software version information for this managed node.

• 

System Location

 - The physical location of this node.

• 

System Contact

 - The textual identification of the contact person for this managed 

node.

• 

Trap Manage IP

 - Displays the IP address of the host to receive the traps.

6. 7. 3.  Ping WatchDog

The Ping Watch Dog is dedicated for continuous monitoring of the particular connection 
to remote host using the Ping tool. It makes the router continuously ping a user defined 
IP address (it can be the internet gateway for example). If it is unable to ping under the 
user defined constraints, the router will automatically reboot.
1. Visit 

http://tplinkwifi.net

, and log in with the username and password you set for the 

router.

2. Go to 

System Tools

 > 

Ping WatchDog

.

3. Configure the settings and click 

Save

.

Downloaded from 

ManualsNet.com

 search engine

Содержание TL-WR802N



























































































































































































Отзывы:

Нет отзывов