manualshive.com logo in svg

TP-Link TL-WR802N, Руководство пользователя, Страница: 127 / 186

Поделиться
Скачать
TP-Link TL-WR802N Скачать руководство пользователя страница 127

123

Chapter 6

 

Configure the Router in Access Point Mode

• 

Type

 - Either select 

Smart IP(DHCP)

 to get IP address from DHCP server, or 

Static IP 

to configure IP address manually.

• 

MAC Address

 - The physical address of the LAN ports. The value can not be changed.

• 

IP Address

 - Enter the IP address in dotted-decimal notation of your router if you 

select 

Static IP

 (the default one is 192.168.0.1).

• 

Subnet Mask

 - An address code that determines the size of the network. Normally 

255.255.255.0 is used as the subnet mask.

Note:

•  If you have changed the IP address, you must use the new IP address to log in.
•  If you select 

Smart IP(DHCP)

, the DHCP server of the router will not start up.

•  If the new IP address you set is not in the same subnet as the old one, the IP address pool in the DHCP Server will be 

configured automatically, but the Virtual Server and DMZ Host will not take effect until they are re-configured.

6. 4.  Wireless

6. 4. 1.  Basic Settings

1. Visit 

http://tplinkwifi.net

, and log in with the username and password you set for the 

router.

2. Go to 

Wireless

 > 

Basic Settings

. 

3. Configure the basic settings for the wireless network and click 

Save

.

Downloaded from 

ManualsNet.com

 search engine

Содержание TL-WR802N



























































































































































































Отзывы:

Нет отзывов