174
Chapter 8
Configure the Router in Client Mode
Note:
• To access the router, enter your router’s WAN IP address in your browser’s address bar, followed by a colon and
the custom port number. For example, if your router’s WAN address is 202.96.12.8, and the port number used is
8080, please enter http://202.96.12.8:8080 in your browser. Later, you may be asked for the router’s password. After
successfully entering the username and password, you will be able to access the router’s web management page.
• Be sure to change the router’s default password for security purposes.
8. 6. 9. System Log
1. Visit
http://tplinkwifi.net
, and log in with the username and password you set for the
router.
2. Go to
System Tools
>
System Log
, and you can view the logs of the router.
•
Loge Type
-By selecting the log type, only logs of this type will be shown.
•
Log Level
- By selecting the log level, only logs of this level will be shown.
•
Refresh
- Refresh the page to show the latest log list.
•
Clear Log
- All the logs will be deleted from the router permanently, not just from the
page.
8. 7. Log out
Click
Logout
at the bottom of the main menu, and you will log out of the web management
page and return to the login window.
Downloaded from