159
Chapter 7
Configure the Router in Range Extender Mode
Note:
If the web management port conflicts with the one used for
Virtual Server
entry, the entry will be automatically disabled
after the setting is saved.
• Allow a specific device to manage the router locally
1. Enter the IP or MAC address of the host that you want to manage the router in the
Available Host (IP/MAC)
entry. The format of the MAC address is XX:XX:XX:XX:XX:XX
(X is any hexadecimal digit).
2. If you want to access the router via both HTTPS and HTTP, please tick the
Enable
box
in
HTTPS Service
column. Otherwise, keep it disbled.
3. Keep the Port as default if you don’t know which port to use.
4. Click
Save
.
Note:
If your PC is blocked but you want to access the router again, press and hold the
Reset
button to reset the router to the
factory defaults.
• Certificate
Download and install the certificate for management via HTTPS if you need it. Once the
certificate is installed, warnings will not pop up when you access the router via HTTPS.
7. 6. 8. System Log
1. Visit
http://tplinkwifi.net
, and log in with the username and password you set for the
router.
2. Go to
System Tools
>
System Log
, and you can view the logs of the router.
•
Loge Type
-By selecting the log type, only logs of this type will be shown.
•
Log Level
- By selecting the log level, only logs of this level will be shown.
•
Refresh
- Refresh the page to show the latest log list.
•
Clear Log
- All the logs will be deleted from the router permanently, not just from the
page.
Downloaded from