116
Chapter 5
Configure the Router in WISP Mode (Hotspot Mode)
Note:
The new username and password must not exceed 15 characters and not include any spacing.
3. Click
Save
.
5. 16. 8. Local Management
This feature allows you to block computers on the LAN from accessing the router by
using the MAC/IP-based authentication.
1. Visit
http://tplinkwifi.net
, and log in with the username and password you set for the
router.
2. Go to
System Tools
>
Administrator
, and focus on the
Service Configuration
section.
• Allow all LAN conencted devices to manage the router locally
1. Keep the
Available Host (IP/MAC)
empty, which means you don’t specify any host to
manage the router.
2. If you want to access the router via both HTTPS and HTTP, please tick the
Enable
checkbox
in
HTTPS Service
column. Otherwise, keep it disbled.
3. Keep the local management port as default if you don’t know which port to use.
4. Click
Save
.
Note:
If the web management port conflicts with the one used for
Virtual Server
entry, the entry will be automatically disabled
after the setting is saved.
• Allow a specific device to manage the router locally
1. Enter the IP or MAC address of the host that you want to manage the router in the
Available Host (IP/MAC)
entry. The format of the MAC address is XX:XX:XX:XX:XX:XX
(X is any hexadecimal digit).
2. If you want to access the router via both HTTPS and HTTP, please tick the
Enable
box
in
HTTPS Service
column. Otherwise, keep it disbled.
3. Keep the Port as default if you don’t know which port to use.
4. Click
Save
.
Note:
If your PC is blocked but you want to access the router again, press and hold the
Reset
button to reset the router to the
factory defaults.
• Certificate
Downloaded from