manualshive.com logo in svg

TP-Link TL-WR802N, Руководство пользователя, Страница: 161 / 186

Поделиться
Скачать
TP-Link TL-WR802N Скачать руководство пользователя страница 161

157

Chapter 7

 

Configure the Router in Range Extender Mode

•  Change the Web Management Port.
•  Upgrade the firmware of the router (system will reboot automatically).
•  Restore the router to its factory defaults (system will reboot automatically).
•  Update the configuration with the file (system will reboot automatically).
1. Visit 

http://tplinkwifi.net

, and log in with the username and password you set for the 

router.

2. Go to 

System Tools

 > 

Reboot

.

•  To reboot manually

Click 

Reboot

, and wait a few minutes for the router to rebooting.

•  To reboot automatically 

•  Select 

Timeout

 in the drop-down list of 

Enable Auto Reboot

 and specify a time 

period (1-72hours), then the router will reboot automatically after every this 
interval.

•  Select 

Schedule 

in the drop-down list of 

Enable Auto Reboot

 and specify the 

Time

 when the router reboots and 

Day

 which to decide how often it reboots.

Downloaded from 

ManualsNet.com

 search engine

Содержание TL-WR802N



























































































































































































Отзывы:

Нет отзывов