-33-
is screen:
as a normal
LAN port when it’s disabled.
Mode:
Select the mode for DMZ port to control the connection way among
DMZ, LAN and Internet. Options include: Public and Private.
IP Address:
Enter the IP address of DMZ port.
Subnet Mask:
Enter the Subnet Mask of DMZ port.
The following items are displayed on th
DMZ
Status:
Activate or inactivate this entry. The DMZ port functions
Tips:
The DHCP service, DHCP Client and DHCP Reservation functions are available when the DMZ port is
enabled. For the con uratio i s
fig
n n tructions, please refer to section 3.1.4.1
to.3.1.4.4.
Note:
When the D
service of DMZ port if
MZ port is enabled in Public Mode, please do not enable the DHCP
your ISP
ccess
provides a single public IP address. Otherwise, the Hosts in DMZ will be unable to a
Internet nor
address r
mally. If an IP
ange is provided by your ISP, please configure the DHCP pool
based
ess range.
3.1.6 MAC Address
The MAC (Media Access Contro
need to be changed commonly.
Set the MAC Address for LAN port:
In a complex network topology with all the ARP bound devices, if you want to use TL-ER6120 instead
the devices under this
te their ARP binding tables.
d the MAC address of the dial-up device, if you
al-up device to be TL-ER6120, you can just set the MAC address of
of the previous dial-up device for a normal
on the IP addr
l) address, as the unique identifier of the router in network, does not
of the current router in a network node, you can just set the MAC address of TL-ER6120‘s LAN port
the same to the MAC address of the previous router, which can avoid all
network node to upda
Set the MAC Address for WAN port:
In the condition that your ISP has bound the account an
want to change the di
TL-ER6120’s WAN port the same to the MAC address
Internet connection.
