72
Chapter 5
Configure the Router in Access Point Mode
• To set System Time:
1. Select the way in which the router gets its time: Get from Internet, Get from Managing
Device, Manually.
2. Select your local
Time Zone
.
3. Enter the address or domain of the
NTP Server 1
or
NTP Server 2
.
4. Click
SAVE
.
• To set up Daylight Saving Time:
1. Select
Enable Daylight Saving
.
2. Select the start time from the drop-down list in the
Start
fields.
3. Select the end time from the drop-down list in the
End
fields.
4. Click
SAVE
.
Note:
This setting will be used for some time-based functions such as firewall. You must specify your time zone once you log
in to the router successfully; otherwise, time-based functions will not take effect.
