49
Chapter 4
Configure the Router in Wireless Router Mode
Done!
Now you can block or allow specific client devices to access your network (via wired or
wireless) using the
Blacklist
or
Whitelist
.
4 7 3 IP & MAC Binding
IP & MAC Binding, namely, ARP (Address Resolution Protocol) Binding, is used to bind
network device’s IP address to its MAC address. This will prevent ARP Spoofing and
other ARP attacks by denying network access to an device with matching IP address in
the Binding list, but unrecognized MAC address.
I want to:
Prevent ARP spoofing and ARP attacks.
How can I do that?
1. Visit
http://tplinkwifi.net
, and log in with the password you set for the router.
2. Go to
Advanced
>
Security
>
IP & MAC Binding
.
3. Enable
IP & MAC Binding
and click
SAVE
.
4. Bind your device(s) according to your need.
To bind the connected device(s):
Locate the
ARP List
section and enable
Bind
to bind the IP and MAC addresses of a
specific device.
To add a binding entry:
1 ) Click
Add
in the
Binding List
section.
