60
Chapter 4
Configure the Router in Wireless Router Mode
2. Go to
Advanced
>
System
>
Diagnostics
.
3. Enter the information:
1 ) Choose
Ping
or
Tracert
as the diagnostic tool to test the connectivity;
•
Ping
is used to test the connectivity between the router and the tested host,
and measure the round-trip time.
•
Tracert
is used to display the route (path) your router has passed to reach the
tested host, and measure transit delays of packets across an Internet Protocol
network.
2 ) Enter the
IP Address
or
Domain Name
of the tested host.
3 ) Modify the
Ping Count
number and the
Ping Packet Size
. It’s recommended to
keep the default value.
4 ) If you have chosen
Tracert
, you can modify the
Traceroute Max TTL
. It’s
recommended to keep the default value.
4. Click
START
to begin the diagnostics.
The figure below indicates the proper connection between the router and the Yahoo
server (www.Yahoo.com) tested through
Ping
.
The figure below indicates the proper connection between the router and the Yahoo
server (www.Yahoo.com) tested through
Tracert
.
