50
Chapter 4
Configure the Router in Wireless Router Mode
2 ) Click
VIEW CONNECTED DEVICES
and select the device you want to bind. Or
enter the
MAC Address
and
IP Address
that you want to bind.
3 ) Click
ADD
.
4 8 ALG (Application Layer Gateway)
View your ALG (Application Layer Gateway) settings in this page. It is recommended to
keep them as default.
4 9 IPv6
This function allows you to enable IPv6 function and set up the parameters of the
router’s Wide Area Network (WAN) and Local Area Network (LAN).
4 9 1 IPv6 Status
1. Visit
http://tplinkwifi.net
, and log in with the password you set for the router.
2. Go to
Advanced
>
IPv6
, and you can view the current IPv6 status information of the
router.
3. Enable IPv6 and select the mode: Router or Pass-Through (Bridge).
