TP-Link Archer C50, Руководство пользователя

Страница: 89 / 135

84
Chapter 5 Configure the Router in Access Point Mode
• DHCP Server - Enable or disable the DHCP server. If disabled, you must have another
DHCP server within your network or else you must configure the computer manually.
• Start IP Address - Specify an IP address for the DHCP Server to start with when
assigning IP addresses.
• End IP Address - Specify an IP address for the DHCP Server to end with when assigning
IP addresses.
• Address Lease Time - The Address Lease Time is the amount of time a network user
will be allowed to connect to the router with the current dynamic IP Address. When
time is up, the user will be automatically assigned a new dynamic IP address.
• Default Gateway (Optional) - It is suggested to input the IP address of the LAN port of
the router.
• Default Domain (Optional) - Input the domain name of your network.
• DNS Server (Optional) - Input the DNS IP address provided by your ISP.
• Secondary DNS Server (Optional) - Input the IP address of another DNS server if your
ISP provides two DNS servers.
Note:
• To use the DHCP server function of the router, you must configure all computers on the LAN as Obtain
an IP Address automatically .
• When you choose Smart IP (DHCP) in Network > LAN , the DHCP Server function will be disabled. You will
see the page as below.