TP-Link Archer C50, Руководство пользователя

Страница: 71 / 135

66
Chapter 4 Configure the Router in Wireless Router Mode
• Certificate
Download and install the certificate for management via HTTPS if you need it. Once the
certificate is installed, warnings will not pop up when you access the router via HTTPS.
4. 18. 11. Remote Management
1. Visit http://tplinkwifi.net , and log in with the password you set for the router.
2. Go to System Tools > Administrator and locate the Service Configuration section.
• Forbid all devices to manage the router remotely:
Do not tick the Enable checkbox of both the HTTP and HTTPS Service in Remote
Management .
• Allow all devices or a specific device to manage the router remotely:
1. Enable HTTP Service Port in the Remote Management. Enable HTTPS Service Port if
you also want to manage the router remotely via the internet.
2. Use the default value HTTP Port: 80 and HTTPS Port: 443 or enter values between
1024 and 65535.
3. Enter the IP or MAC address in the Available Host (IP/MAC) column to allow only this
specific device to manage the router remotely. Or leave it blank to allow all devices to
manage manage the router remotely.
• Certificate
Download and install the certificate for management via HTTPS if you need it. Once the
certificate is installed, warnings will not pop up when you access the router via HTTPS.
Note:
• If your PC is blocked but you want to access the router again, press and hold the Reset button to reset
the router to the factory defaults.
• To access the router, enter your router’s WAN IP address in your browser’s address bar, followed by a
colon and the custom port number. For example, if your router’s WAN address is 202.96.12.8, and the