57
Chapter 4
Configure the Router in Wireless Router Mode
MTU. But this is rarely required, and should not be done unless you are sure it is
necessary for your ISP connection.
•
Enable MLD Proxy
- Enable the Multicast Listener Discovery (MLD) Proxy
function if you need.
PPPoEv6
•
PPP Username/Password
- Enter the user name and password provided by
your ISP. These fields are case-sensitive.
•
Authentication Type
– Choose one authentication type from AUTO-AUTH, PAP,
CHAP and MS-CHAP.
•
Addressing Type
- There are two types of assignation for IPv6 address:
SLAAC (Stateless address auto-configuration) and DHCPv6 (Dynamic Host
Configuration Protocol for IPv6) Server.
•
MTU(Bytes)
- The normal MTU (Maximum Transmission Unit) value for most
Ethernet networks is 1500 Bytes. For some ISPs, you may need to modify the
MTU. But this is rarely required, and should not be done unless you are sure it is
necessary for your ISP connection.
•
Enable MLD Proxy
- Enable the Multicast Listener Discovery (MLD) Proxy
function if you need.
•
Use IPv6 address specified by ISP
- Input a static IPv6 address from the ISP.
•
Set IPv6 DNS Server manually
- Enter the IP address of the IPv6 DNS server
and secondary IPv6 DNS server.
Содержание Archer C50
Страница 1: ...REV6 0 0 1910012866 2020 TP Link User Guide AC1200 Dual Band Wi Fi Router...
Страница 15: ...Chapter 3 Log In This chapter introduces how to log in to the web management page of router...
Страница 120: ...115 3 Click LAN settings and deselect the following three options and click OK...