S.1 Safe Work
13
S.1.2
Rules for Safe Operation
[ 1 ] General Rules
[ 1.1 ]
Absolute precautions
(1) Never allow non-qualified workers to carry out
connection or disconnection of the primary
power lines.
(2) Never try live-wire operation when changing
the wiring on the machine.
(3) Never start the machine without communicat-
ing your intention to co-workers or without con-
firming their answer to your signal.
(4) Never touch rotating or operating parts until
the machine comes to a complete stop.
(5) Never operate the machine in clothes which
could become entangled in the rotating parts.
(6) Never remove any of the warning notice, cau-
tion plates or instruction plates from the
machine, no matter what.
[ 1.2 ]
Handling abnormal situations
(1) Always turn the power off before making any
adjustments or repairs to correct abnormalities
occurring during operation.
(2) If you turn off the machine, be sure to put up
the warning notice on the power switch.
(3) The temporary warning notice (tag) should be
removed only by the person who put it up,
once it has become unnecessary.
[ 1.3 ]
Other precautions
(1) The supervisor should make sure that each
worker sufficiently observes all safety rules.
(2) Observe the safety codes and regulations
enforced in individual countries.
[ 2 ] Precautions for Weaving
[ 2.1 ]
Starting
(1) Make sure that there is no one beside or behind the machine.
(2) When two or more workers are to handle a job, they must always communicate through words or ges-
tures before starting the job.
(3) Before pressing any switches on the machine, be sure to identify them to prevent mistakes.
DON'T TURN THE SWITCH ON
